It is the duty and desire of electricians to have all components functioning in the most optimal level. Malfunction is often caused by damages, poor installation work, corrosion or even contamination. The most common sign of a problem in the system is excessive heat resulting from poor conductivity. If left unchecked, the results can range from unnecessary and costly power disruption to very catastrophic events such as electrocution and fires. Initially, more costly and time consuming physical inspection was the only dependable way to keep the system safe but engineers are now migrating to electrical infrared inspection method which has proven not only cheaper but more effective.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
The target is to pinpoint any damages or potential threats resulting from improper installations, points of weaknesses, contamination, corrosion or worn out devices. The other problems can result from ground faults and improper assembly leading to increased resistance which is the recipe for overheating which on its own is a danger to the rest of the system and the surrounding objects. If left unchecked power outages are the least of problems that can result.
The most common system components that are subject to periodic surveys include the bus ducts, the distribution panels, distribution centers, receptacle panels, the sub-feed panels, transformers, the switchgears, the lighting system, uninterruptible power supplies, the disconnects and several other related components. With infrared surveys, the faults, loose connections and any potential hazards in these components can easily be detected with the minimal time and cost.
If you choose to use this form of testing, there is no need to shut down any part of the system as the testing is non-contact and nondestructive (NDT) at the same time. This means that all components can be inspected under their normal loads in the normal operating system. It involves scanning with the aim of revealing improper connections, damages and any form of flaws well in advance before they can result to any disaster.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
Among several benefits you stand to benefit from, there is the precise pinpointing of hotspots, reduced down time, elimination of unscheduled outages, reduced cost of energy due to efficiency and predictive or proactive approach to electrical maintenance program. The general reduction of resource deployed (human resources and finances) also translates to lower cost of energy.
In order to fully benefit from this cutting edge technology, you must be very keen on the companies you choose for the job. At minimum, the prospective company must have some proven record of good job done on previous assignments. For a good choice, the level of experience of staff also matters.
It is a good practice to inspect all electrical system components twice a year or at least every 12 months at minimum. When properly conducted, it is possible to detect and prevent accidents well in advance before they occur. For the equipment and the control systems that are subjected to movements and vibrations, every six months inspection is not optional.
The target is to pinpoint any damages or potential threats resulting from improper installations, points of weaknesses, contamination, corrosion or worn out devices. The other problems can result from ground faults and improper assembly leading to increased resistance which is the recipe for overheating which on its own is a danger to the rest of the system and the surrounding objects. If left unchecked power outages are the least of problems that can result.
The most common system components that are subject to periodic surveys include the bus ducts, the distribution panels, distribution centers, receptacle panels, the sub-feed panels, transformers, the switchgears, the lighting system, uninterruptible power supplies, the disconnects and several other related components. With infrared surveys, the faults, loose connections and any potential hazards in these components can easily be detected with the minimal time and cost.
If you choose to use this form of testing, there is no need to shut down any part of the system as the testing is non-contact and nondestructive (NDT) at the same time. This means that all components can be inspected under their normal loads in the normal operating system. It involves scanning with the aim of revealing improper connections, damages and any form of flaws well in advance before they can result to any disaster.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
Among several benefits you stand to benefit from, there is the precise pinpointing of hotspots, reduced down time, elimination of unscheduled outages, reduced cost of energy due to efficiency and predictive or proactive approach to electrical maintenance program. The general reduction of resource deployed (human resources and finances) also translates to lower cost of energy.
In order to fully benefit from this cutting edge technology, you must be very keen on the companies you choose for the job. At minimum, the prospective company must have some proven record of good job done on previous assignments. For a good choice, the level of experience of staff also matters.
About the Author:
If you need information about electrical infrared inspection, pay a visit to the web pages here today. You can see details at http://www.infraredscanningservice.com now.
Aucun commentaire:
Enregistrer un commentaire